subject
Engineering, 13.03.2020 00:55 RockieLuv7292

A stretch of 1 km new concrete pavement is being laid in a 100 mm thick layer. The ambient temperature when laying the concrete is 20°C, and you can assume that the concrete does not have any internal stress at this temperature. The thermal expansion coefficient of concrete is 10μm/m°C, and its elastic modulus is 20 GPa. Suppose all deformation of the concrete is restrained (the concrete cannot move), and suppose that the concrete behaves as a linear elastic material. Knowing its tensile strength is 10 MPa, at what temperature does this concrete crack? (10 pts)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
A stretch of 1 km new concrete pavement is being laid in a 100 mm thick layer. The ambient temperatu...
Questions
question
Mathematics, 05.02.2020 12:02
Questions on the website: 13722362