subject
Engineering, 12.03.2020 22:57 kaleec

If the surface energy of a magnesium oxide - nickel oxide (MgO-NiO) solid solution is 1.23 J/m2 and its elastic modulus is 208 GPa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile stress of 97 MPa normal to this elliptical flaw

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
If the surface energy of a magnesium oxide - nickel oxide (MgO-NiO) solid solution is 1.23 J/m2 and...
Questions
question
Biology, 22.08.2019 04:00
Questions on the website: 13722361