Engineering, 12.03.2020 17:26 kianakilbourn8
What is the expected life 1 inch diameter bar machined from AISI 1020 CD Steel is subjected to alternating bending stress between 1 and 50 kpsi at 350 deg C. Find the factor of safety guarding against static (single cycle) failure, and either the factor of safety guarding against fatigue failure or the expected life of the part with 99 percent reliability.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:20
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
Engineering, 05.07.2019 10:10
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
What is the expected life 1 inch diameter bar machined from AISI 1020 CD Steel is subjected to alter...