Engineering, 12.03.2020 17:34 beckytank6338
Which factor is typically not a requisite feature of setting a career goal?
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Which factor is typically not a requisite feature of setting a career goal?...
Social Studies, 23.03.2021 17:30
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
History, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40
English, 23.03.2021 17:40
English, 23.03.2021 17:40
Mathematics, 23.03.2021 17:40