Engineering, 12.03.2020 05:36 aspenwheeler6804

A simple ideal Rankine cycle which uses water as the working fluid operates its condenser at 40°C and its boiler at 250°C. Calculate the work produced by the turbine, the heat supplied in the boiler, and the thermal efficiency of this cycle when the steam enters the turbine without any superheating

Answers: 1

Show answers

Answers

Answer from: taleiayarbough9783

The thermal efficiency is 37.5%.

Explanation:

The T-s diagram with steam was attached below.

The table of saturated water temperature is referred and the interpret value is $h_{1}$ and $V_{1}$ at the temperature of 40° C.

$h_{1}$ = $h_{f}$ = 167.53 KJ/Kg

$V_{1}$ = $V_{f}$ = 0.001008 $m^{3}$ / Kg

For $P_{1}$ and $P_{2}$ the interpret value at the table of saturated water temperature is

$P_{1}=P_{\text {Sat at } 40}$ = 7.385 K Pa

$P_{2}=P_{\text {Sat at } 300}$ = 8.588 K Pa

The specific work input is expressed:

$w_{\mathrm{p,in}}=v_{1}\left(P_{2}-P_{1}\right)$

= 0.001008 $m^{3}$ / Kg(8.588 K Pa - 7.385 K Pa)

$w_{p,in}$ = 8.65 KJ/Kg

Enthalpy steam is expressed in state 2.

$h_{2}$ = $h_{1}$ + $w_{p,in}$

$h_{2}$ = 167.53 KJ/Kg + 8.65 KJ/Kg

$h_{2}$ = 176.18 KJ/Kg

The table of saturated water temperature is referred and the interpret value is $s_{3}$ and $h_{3}$ at the temperature 300° C.

$s_{3}$ = $s_{g}$ = 5.7059 KJ/Kg.K

$h_{3}$ = $h_{g}$ = 2749.6 KJ/Kg

For $S_{f}$ and $S_{fg}$ the interpret value at the table of saturated water temperature is

$S_{f}$ = 0.5724 KJ/Kg.K

$S_{fg}$ = 7.6832 KJ/Kg.K

At last the process of heat rejection, the steam quality is expressed.

$x_{4}=\frac{s_{4}-s_{f}}{s_{fg}}$

$x_{4}=\frac{5.7059-0.5724}{7.6832}$

$x_{4}$ = 0.6681

The table of saturated water temperature is referred and the interpret value is $h_{fg}$ at the temperature of 40° C as 2406 KJ/Kg.

Enthalpy steam is expressed in state 4.

$h_{4}$ = $h_{f}$ + $x_{4}$ $h_{fg}$

$h_{4}$ = 167.53 KJ/Kg + 0.6681(2406 KJ/Kg)

$h_{4}$ = 1775.1 KJ/Kg

For the Rankine cycle, the specific heat input is expressed.

$q_{in}$ = $h_{3}$ - $h_{2}$

$q_{in}$ = 2749.6 - 176.18

$q_{in}$ = 2573.4 KJ/Kg

For the Rankine cycle, the specific heat output is expressed.

$q_{out}$ = $h_{4}$ - $h_{1}$

$q_{out}$ = 1775.1 - 167.53

$q_{out}$ = 1607.57 KJ/Kg

The specific net work output is expressed.

$w_{T,out}$ = $h_{3}$ - $h_{4}$

$w_{T,out}$ = 2749.6 - 1775.1

$w_{T,out}$ = 974.5 KJ/Kg

The thermal efficiency is expressed.

$\eta_{\mathrm{th}}=1-\frac{q_{out}}{q_{\mathrm{in}}}$

$\eta_{\mathrm{th}}=1-\frac{1,607.6 \mathrm{kJ} / \mathrm{kg}}{2,573.4 \mathrm{kJ} / \mathrm{kg}}$

=1 - 0.6246

= 0.3753

Hence, the thermal efficiency is 37.5%

A simple ideal Rankine cycle which uses water as the working fluid operates its condenser at 40°C an

Answer from: Quest

Oh yes igger daddy filled my loose ahοle with your sweet sweet mсum said ronald mcdonald as he spread his sesame covered mcahοle for thanos. thanos slid his throbbing purple ᑕock in to ronald's a. o screamed ronald as he poor hole was torn to bloody shreds. gunga gingagunga gingagunga gingagunga ginga a space ranger appeared making autistuc noises odio a los negros! said buzz lightyear as he aped them both.

Answer from: Quest

answer:

not sure

explanation:

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

You know the right answer?

A simple ideal Rankine cycle which uses water as the working fluid operates its condenser at 40°C an...

Questions