Fluid Dynamics: How do I find gauge pressure of an air current at various points around a cylinder?A freestream air current of velocity 15m/s flows through a wind tunnel. The current hits a cylinder of diameter 19mm, and has a laminar boundary layer. The stagnation pressure in the test section of the wind tunnel is 1 atm. Determine the minimum and maximum gauge pressures of the flow around the cylinder. I'm given the equation Cp=2(P-Po)/(?V^2), where Cp is the pressure coefficient, Po is the upstream static pressure. My problem is largely confusion over what to do with the diameter of the cylinder and where it comes into play here.

The answer is as given in the explanation.

Explanation:

The 1st thing to notice is the assumptions required. Thus as the diameter of the cylinder and the wind tunnel are given such that the difference is of the orders of the magnitude thus the assumptions as given below are validated.

By D'alembert's paradox, "The net pressure drag exerted on a circular cylinder that moves in an inviscid fluid of large extent is identically zero".Just in the surface of the cylinder, the velocity profile can be given in the next equation:

And the pressure P on the surface of cylinder is given by Bernoulli's equation along the streamline through that point:

where P_∞ is  Pressure at stagnation point, U is the velocity given, ρ is the density of the fluid (in this case air) and θ is the angle measured from the center of cylinder to the adjacent point where your pressure point will be determine.

the clapeyron equation (also called the clausius-clapeyron equation) relates the slope of a reaction line on a phase diagram to fundamental thermodynamic properties.

explanation: