subject
Engineering, 11.03.2020 16:57 nataliastrong3846

You are writing a program to track the scores for the Masters. The Masters Golf tournament takes place over 4 days Thursday – Sunday. After the first 2 days, a cut-off score is calculated to reduce the size of the field for the weekend rounds that take place on Saturday and Sunday. To "make the cut", players must be either in the group of 50 players closest to the leader’s score (ties counting), or within 10 strokes of the leader's score. You are going to write a program that loads the player’s scores for the first 2 days of play into arrays, adds the scores to get a combined score, searches the combined score array to find out who has the lowest score (the leader), and displays a list of players who are within 10 strokes of the leader’s score. (As an example, if the leader scores a 140 after 2 days of play, then "within 10" means a score less than or equal to 150…anyone over 150 does not make the cut unless they are within the 50 players who are closest to the leader’s score.) We are only determining who is within 10 of the leader’s score.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
You are writing a program to track the scores for the Masters. The Masters Golf tournament takes pla...
Questions
question
Mathematics, 20.01.2021 19:50
question
Computers and Technology, 20.01.2021 19:50
question
Mathematics, 20.01.2021 19:50
question
English, 20.01.2021 19:50
Questions on the website: 13722363