subject
Engineering, 11.03.2020 04:36 Cocco

Joe Bruin has a big lawn in front of his house that is 30 meters wide and 20 meters long. Josephine makes him go out and mow the grass every weekend, so several years ago, he bought a fancy John Deere riding mower , which he loves to ride around his yard. The mower has a gasoline engine that is rated at 20 horsepower. To mow his lawn each week, Joe needs to use the mower for about 30 minutes, and the average power used by the mower during this period is 5 horsepower. Joe has a very healthy lawn that generates a lot of lawn clippings, and after doing the EPSS 101 biofuels lab, Joe gets the idea that 3 if he converted his mower to run on biofuelds instead of gasoline, then maybe he could use biofuels generated from his lawn clippings to power his mowera. Calculate the weekly fuel energy requirements for Joe’s riding mower. (Hint. Don’t forget to include the efficiency of the mower’s internal combustion engine)b. Calculate the chemical energy content of the clippings produced by Joe’s lawn each week, assume solar insolation is 5.62 kWH per square meter per day (Hint. Start with the amount of sunlight the lawn absorbs each week and then use the photosynthetic efficiency of corn to calculate the chemical energy content of the grass that grows each week)c. Use your answer from Part b to calculate the mass of grass clippings produced by Joe’s lawn each week. Given that the density of grass clippings is 667 pounds per cubic yard, how many 50-gallon trash cans would be required to hold the clippings? (Hint: Convert the energy content you calculated for Part b to dry biomass content, and then assume that the grass clippings are 80% water)d. Joe’s first idea is to use solar power to dry the grass clippings. Then, he would mod his riding mower to install a Stirling engine in place of the gasoline engine, and then power the engine by burning the grass clippings. Compare the fuel energy that could be provided by burning the grass clippings in this manner each week to the energy needs of Joe’s riding mower. Independent of the significant air pollution that would be generated by burning the clippings, would this scheme work? Could the clippings power Joe’s mower? Would there be any energy left over for other purposes?e. Josephine works in a biology lab at UCLA and they have recently come up with a magic strain of bacteria that converts cellulose (the dominant organic component of grass clippings) into glucose. To create ethanol fuel, Joe and Josephine put the wet grass clippings into barrels, and then add an equal mass of water, plus a cup of the magic bacteria, and then they let it sit for two weeks while the cellulose is converted to glucose. Then, Joe takes the resulting glucose solution and adds yeast to ferment the solution to produce a 15% ethanol solution, which takes an additional week. Then, every week, he burns additional grass clippings in a large still to distill the 15% ethanol solution to create a 95% ethanol solution. The resulting distillate is clean-burning fuel, which Joe uses to power his riding mower, which he has, of course, modified to run on ethanol. Ignoring the fact that the magic strain of bacteria doesn’t really exist, will this scheme work? Would the clippings provide enough ethanol to power Joe’s mower? Would there be any additional ethanol left over for other purposes, like powering Joe’s car, or to create alcoholic beverages to 4 drink when Joe’s friends come over to watch UCLA football games on Saturday afternoons?f. If Joe could find a way to use biofuels to power his mower, would this whole operation be sustainable? Discuss the needs of Joe’s lawn for water and nutrients. Discuss the demands on Joe’s time. Do you think Joe would have enough time to run his home biofuel operation and also have time to invite his friends over to watch football games on weekends?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Joe Bruin has a big lawn in front of his house that is 30 meters wide and 20 meters long. Josephine...
Questions
question
Mathematics, 01.12.2020 17:40
Questions on the website: 13722363