subject
Engineering, 11.03.2020 02:49 ultimatesaiyan

Recent development near Eugene, Oregon, has identifi ed a need for improved access to Interstate 5 at one location. Civil engineers and public planners are considering three alternative access plans. Benefi ts are estimated for the public in general; disbenefi ts primarily affect some local proprietors who will see traffi c pattern changes as undesirable. Costs are monetary for construction and upkeep, and savings are a reduction in cost of those operations today that will not be necessary in the future. All fi gures are relative to the present situation, retention of which is still an alternative, and are annualized over the 20-year planning horizon. Alternative A B C Benefi ts $200,000 $300,000 $400,000 Disbenefi ts $37,000 $69,000 $102,000 Costs $150,000 $234,000 $312,000 Savings $15,000 $31,000 $42,000 a) What is the B/C ratio for each of these alternatives ?b) Using incremental B/C ratio analysis, which alternative should be selected ?c) Determine the value of B - C for each alternative.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Recent development near Eugene, Oregon, has identifi ed a need for improved access to Interstate 5 a...
Questions
question
Biology, 09.09.2020 19:01
Questions on the website: 13722367