Engineering, 10.03.2020 01:42 bakerj8395
Technician A says that when using an impact wrench to remove a bolt from the front of an engine's crankshaft, the crankshaft must be held to keep it from turning. Technician B says that when using an impact wrench to remove lug nuts on a raised vehicle, the brakes must be applied. Who is right?
a. Technician A
b. Technician B
c. Both A and B
d. Neither A nor B
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Technician A says that when using an impact wrench to remove a bolt from the front of an engine's cr...
Mathematics, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01
English, 28.06.2020 22:01
Social Studies, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01
Mathematics, 28.06.2020 22:01