Engineering, 07.03.2020 01:44 Ackussinglake63
You have been asked to design a steady state treatment device similar to a continuously mixed reactor to treat toluene in an aqueous waste stream. The flow into the system is 1 m3/hr and the toluene concentration is 10 ppm. The system utilizes a particular type of bacteria that can consume toluene following a first order reaction. The rate constant is 0.1 day-1. If the reactor must treat to an effluent concentration of 1 ppm, how big should it be (Volume)?
Answers: 2
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in Β°c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
You have been asked to design a steady state treatment device similar to a continuously mixed reacto...
English, 24.09.2019 01:00
English, 24.09.2019 01:00
Social Studies, 24.09.2019 01:00
Mathematics, 24.09.2019 01:00
Mathematics, 24.09.2019 01:00
Chemistry, 24.09.2019 01:00
Social Studies, 24.09.2019 01:00
Biology, 24.09.2019 01:00
English, 24.09.2019 01:00
Mathematics, 24.09.2019 01:00
History, 24.09.2019 01:00
Chemistry, 24.09.2019 01:10