subject
Engineering, 06.03.2020 19:05 khaylaperry

A well that pumps at a constant rate of 0.5 m3/s fully penetrates a confined aquifer of 34-m thickness. After a long period of pumping, steady-state drawdowns are measured at two observation wells 50 and 100 m from the pumping well as 0.9 m and 0.4 m, respectively. Determine: (a) the hydraulic conductivity and transmissivity of the aquifer; (b) the radius of influence of the pumping well; (c) the expected drawdown in the pumping well if the radius of the well is 0.4 m.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
A well that pumps at a constant rate of 0.5 m3/s fully penetrates a confined aquifer of 34-m thickne...
Questions
question
Mathematics, 14.10.2019 02:30
question
Mathematics, 14.10.2019 02:30
Questions on the website: 13722363