Engineering, 04.03.2020 21:00 abbygailgo674
Consider a thin-walled cylindrical tube having a radius of 65 mm that is to be used to transport pressurized gas. If inside and outside tube pressures are 100 and 1.0 atm (10.13 and 0.1013 MPa), respectively, compute the minimum required thickness for each of the following metal alloys. Assume a factor of safety of 3.5. (b) A tube constructed of which of the alloys will cost the least amount
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Consider a thin-walled cylindrical tube having a radius of 65 mm that is to be used to transport pre...
Questions
Mathematics, 13.04.2020 23:16
Biology, 13.04.2020 23:16
Social Studies, 13.04.2020 23:16
Arts, 13.04.2020 23:16
Mathematics, 13.04.2020 23:16
Mathematics, 13.04.2020 23:16
