Engineering, 03.03.2020 20:55 qhenley

A shell and tube heat exchanger must be designed to heat 2.5 kg/s water from 15 to 85 degrees celsius. The heating is to be accomplished by passing hot engine oil, which is available at 160 degrees celsius, through the shell side of the exchanger. The oil is known to provide an average convection coefficient of h0 = 400 W/mK on the outside of the tubes. Ten tubes pass the water through the shell. Each tube is thin walled, of diameter D = 25 mm, and makes eight passes through the shell. If the oil leaves the exchanger at 100 degrees celsius, what is its flow rate? How long must the tubes be to accomplish the desired heating?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

A shell and tube heat exchanger must be designed to heat 2.5 kg/s water from 15 to 85 degrees celsiu...

Questions

SAT, 29.11.2021 22:00

Study the diagram shown. Which type of evidence for the theory of evolution does the diagram show? homologous structures embryological structures best...