Engineering, 03.03.2020 01:30 jasonlawrencejr6844
A round hot air jet (such as from hair dryer) is impinged on a flat surface of a large solid object whose initial temperature is much lower than the hot air temperature. Assume the air jet flow remains laminar, develop a model to estimate the time-dependent change and distribution of surface temperatures.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
You know the right answer?
A round hot air jet (such as from hair dryer) is impinged on a flat surface of a large solid object...
Questions
Computers and Technology, 30.12.2019 23:31
Mathematics, 30.12.2019 23:31
Mathematics, 30.12.2019 23:31
