Engineering, 29.02.2020 01:51 lexylexy8583

In the text we investigated the parabolic velocity profile associated with the laminar flow of fluid through a circular pipe. If the pipe wall is heated in such a way that the wall heat flux is independent of the axial position (e. g. via a resistance heating element wrapped around the pipe at a constant pitch), the temperature profile within the fluid is given by

T=Ts-Co(3Rp^2/16 - r^2/4 + r^4/16Rp^2) where T is the temperature of the pipe surface and Co is a constant. ( Rp is another variable)

!. What are the dimensions for Co.

2. Sketch the temperature profile as a function of r for constant axial position

3. Compare and discuss the shapes of the temperature and velocity profiles

4. Calculate the diffusive heat flux per unit area to the pipe wall.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

In the text we investigated the parabolic velocity profile associated with the laminar flow of fluid...

Questions