Engineering, 28.02.2020 22:20 rudolph34

Post 4 (Jasmine): Writing from Grendel's perspective makes him seem more sympathetic, because you're able to see that he has feelings and thoughts. Therefore, the suffering he endures at the hands of Beowulf makes you feel bad that he's so alone. For example, he bellows for his mother when he is scared, he physically suffers in his fight with Beowulf, and he dies with no one to comfort him. If we were seeing this from the men's perspective, we'd also be afraid of Grendel and see him as monstrous, but seeing the scenes from his perspective makes us realize that he's not angry or monstrous at these points; he's just scared. Write a short answer for each question..Before you choose an argument to respond to, take a moment to consider your opinion about Gardner's decision to write his novel from Grendel's perspective. Do you think this perspective makes Grendel seem more sympathetic or more monstrous?I think it would make him seem more sympathetic, because we would be able to hear his side, how he feels and how he see’s things around him. So, we would view him as less monstrous

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 06.07.2019 03:10

Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air

Answers: 1

Answer

Engineering, 06.07.2019 04:10

An array of m-50 thermoelectric modules is installed on the exhaust of a sports car. each module has an effective seebeck coefficient of sp of 0.143 5vk and an internal electrical resistance of r.-4 ? in addition, : (15 points each module is of width w 60mm and contains n=100 pairs of semiconducting pellets. each pellet hasan overall length of 2l-5mm and a cross-sectional area as 1.2 x 10'm and is characterized by a thermal conductivity of kpl2w rnk. the hot side of each module is exposed to exhaust gases at·p650c with hia4ow rrk while the osite side of each module is cooled by pressurized water at surface) and 156 °c (at the cool surface). 11s c with h: -500w/m'k. the modules are wired n series and the load resistance is r d=400ohm .the module surface temperatures, t, and ts are 183 "c (at the hot surface and 156c (at the cool surface) a)-draw a schematic of this scenario and label all parts. a. b. if the induced current, i, is 0.15 amps, what is the total power (pa) for one module? c. what is the total power harvest from the exhaust with all 50 modules?

Answers: 2

Answer

You know the right answer?

Post 4 (Jasmine): Writing from Grendel's perspective makes him seem more sympathetic, because you're...

Questions