Engineering, 26.02.2020 03:29 Jofish5815

A conical funnel of half-angle θ = 30 drains through a small hole of diameter d = 6:25 mm at the vertex. The speed of the liquid leaving the funnel is V= √ 2gy where y is the height of the liquid free surface above the hole. The funnel initially is filled to height y0 = 300 mm. Obtain an expression for the time, t, for the funnel to completely drain, and evaluate. Find the time to drain from 300 mm to 150 mm (a change in depth of 150 mm), and from 150 mm to completely empty (also a change in depth of 150 mm). Can you explain the discrepancy in these times?

Answers: 1

Show answers

Answers

Answer from: gianna61

3175.424*y^3 + 0.45153*y + 55.552*y^2 = t + 12.0347055

t = 12.03

t = 81.473

velocity of the fluid decreases with level of fluid. Hence, in later stages the time taken is greater than in earlier stages

Explanation:

Given:

- The half angle θ = 30°

- The diameter of the small hole d = 6.25 mm

- The flow rate out of the funnel Q = A*√ 2gy

- The volume of frustum of cone is given by:

$V = \frac{\pi }{12}*y*(D^2 + d^2 + d*D})$

Where,

D: Is the larger diameter of the frustum

d: Is the smaller diameter of the frustum

y: The height of the liquid free surface from small diameter d base.

Find:

- Obtain an expression for the time, t, for the funnel to completely drain, and evaluate.

- Find the time to drain from 300 mm to 150 mm (a change in depth of 150 mm) and from 150 mm to completely empty (also a change in depth of 150 mm)

- Can you explain the discrepancy in these times?

Solution:

- We will use rate of change analysis by considering the rate of change of volume, and then apply the chain rule.

- The Volume of the frustum is a function of d , D , y. V = f ( d , D , y ). In our case the diameter of base d remains constant. Then we are left with:

V = f ( D , y )

- Determine a relationship between y and d. We will use half angle θ to determine the relationship between D and y by applying trigonometric ratios:

tan ( θ ) = D / 2*y

D = 2*y*tan ( θ )

- We developed a relationship between D and y in terms of half angle which remains constant. So the Volume is now only a function of one variable y:

V = f ( y )

- The volume of frustum of the cone can be written as:

$V = \frac{\pi }{12}*y*(D^2 + d^2 + d*D})$

Substituting the relationship for D in terms of y we have:

$V = \frac{\pi }{12}*y*(4*y^2*tan(Q) ^2 + d^2 + 2*d*y*tan(Q)})$

- Now by rate of change of Volume analysis we have:

dV / dt = [dV / dy] * [dy / dt]

- Computing dV / dy, where V = f(y) only:

$V = \frac{\pi }{12}*(4*y^3*tan(Q) ^2 + y*d^2 + 2*d*y^2*tan(Q)})\\\\\frac{dV}{dy} = \frac{\pi }{12}*(12*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)})\\\\$

- Where, dV/dt = Volume flow rate:

$\frac{dV}{dt} = - Q\\\frac{dV}{dt} = - A*V\\\frac{dV}{dt} = - \frac{\pi*d^2 }{4} *\sqrt{2*g*y}$

- Then from Chain rule we have:

[dy / dt] = [dV / dt] / [dV / dy]

$\frac{dy}{dt} = \frac{- \frac{\pi*d^2 }{4} *\sqrt{2*g*y}}{\frac{\pi }{12}*(12*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)}\\\\} \\\frac{dy}{dt} = \frac{-d^2 *\sqrt{2*g*y}}{(4*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)}\\\\}$

- Separate variables:

$\frac {(4*y^2*tan(Q) ^2 + d^2 + 4*d*y*tan(Q)} {\sqrt{2*g*y}} .dy = {-d^2} .dt\\\\\frac { 1 } { \sqrt{2*g} }*(4*y^1^.^5*tan(Q) ^2 + y^-^0^.^5d^2 + 4*d*y^0^.^5*tan(Q))= {-d^2} .dt\\$

- Integrate both sides:

$\frac { 1 } { \sqrt{2*g} }*(4*y^1^.^5*tan(Q) ^2 + y^-^0^.^5d^2 + 4*d*y^0^.^5*tan(Q))= {-d^2} .dt\\\\\frac { 1 } { \sqrt{2*g} }*(\frac{8}{5}*y^2^.^5*tan(Q) ^2 + 2*d^2*y^0^.^5 + \frac{8}{3}*d*y^1^.^5*tan(Q)) = -d^2*t + C\\\\\frac { 1 } { \sqrt{2*y*g} }*(\frac{8}{5}*y^3*tan(Q) ^2 + 2*d^2*y + \frac{8}{3}*d*y^2*tan(Q)) = -d^2*t + C\\\\0.1204*y^3 + 0.000017638*y + 0.00217*y^2 = -0.0000390625*t + C\\\\3175.424*y^3 + 0.45153*y + 55.552*y^2 = -t + C$

- Evaluate @ t = 0 , y = 0.3 m

$3175.424*(0.15)^3 + 0.45153*(0.15) + 55.552*(0.15)^2 = 0 + C\\\\C = 12.0347055\\\\3175.424*y^3 + 0.45153*y + 55.552*y^2 = t + 12.0347055$

- Time taken from y = 300 to 150 mm:

$3175.424*0.15^3 + 0.45153*0.15 + 55.552*0.15^2 = -t + 90.871587\\\\t = 0 - -12.0347055\\\\t = 12.0347055 s\\$

- Time taken from y = 150 to 0 mm:

t = t_(0-300) - ( t_(0-150) = 90.871587 - 12.0347055 = 81.4721 s

- The discrepancy is time can be explained by the velocity of fluid coming out of bottom is function of y. The velocity of the fluid decreases as the level of fluid decreases hence the time taken from y =150 mm to 0 mm is larger than y = 300 mm to y = 150 mm.

Answer from: Quest

answer: 500 wph.

explanation:

Answer from: Quest

i mean i gues

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 04.07.2019 19:10

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

Answer

You know the right answer?

A conical funnel of half-angle θ = 30 drains through a small hole of diameter d = 6:25 mm at the ver...

Questions