A composite wall separates combustion gases at 2600 °C from a liquid coolant at 100 °C, with gas- and liquid-side convection coefficients of 50 and 1000 W/m^2K. The wall is composed of a 10-mm- thick layer of beryllium oxide on the gas side and a 20-mm-thick slab of stainless steel on the liquid side. The contact resistance between the oxide and the steel is 0.05 m^2K/W. What is the heat flux of the composite wall? Sketch the temperature distribution from the gas to the liquid.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.