Engineering, 25.02.2020 17:23 destineenikole17

To ensure that doors return to their closed positions, springs are commonly attached to them. However, with this spring the door may swing back and forth several times. For this problem, analyze a door 1 meter wide and 2.25 meters tall, with a mass of 22.7 kg (50 lbm). The mass moment of inertia of the door about its hinge axis is calculated to be 7.57 kg-m2.

a) Draw the free body diagram for this system and derive the equation of motion for the door and spring system. We will analyze the response of the door when subjected to a short, hard push which can be modelled as a unit impulse. Include this pushing force in your EOM.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

Answer

You know the right answer?

To ensure that doors return to their closed positions, springs are commonly attached to them. Howeve...

Questions