Engineering, 25.02.2020 06:17 jacobc7698
Air flows into a subsonic aircraft inlet with a velocity of 206 m/s. The static temperature and pressure of the air at the inflow section are 227 K and 22.4 kPa respectively. The inflow area is 0.56 m2 . The outflow air has static temperature and pressure of 241 K and 26.4 kPa respectively, and its velocity is 118 m/s. Assuming steady quasi-1D flow across the inlet and exit sections, calculate: (a) the mass flow rate of air through the inlet; (b) the outflow area; (c) the inflow and outflow Mach numbers (d) the specific entropy increase [J/kg-K] of the air for the stated conditions. Hint: We are not making an isentropic assumption in this problem, but calculating (s2-s1) based on exit and inlet conditions. 2. Air enters a compressor at a pressure of 74.7 kPa and 287 K and leaves at 622 kPa and 579 K. The air flow rate is 50 kg/s. Calculate the shaft power input required to drive the compressor. Hint: The shaft power that goes into the compressor increases the total enthalpy of the air from the inlet to the exit, since there is no heat into the system.
Answers: 1
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Air flows into a subsonic aircraft inlet with a velocity of 206 m/s. The static temperature and pres...
English, 30.09.2019 19:30
Mathematics, 30.09.2019 19:30
Mathematics, 30.09.2019 19:30
Geography, 30.09.2019 19:30
Business, 30.09.2019 19:30
Social Studies, 30.09.2019 19:30
Health, 30.09.2019 19:30
Mathematics, 30.09.2019 19:30
Geography, 30.09.2019 19:30
Physics, 30.09.2019 19:30
Social Studies, 30.09.2019 19:30
English, 30.09.2019 19:30
English, 30.09.2019 19:30
Arts, 30.09.2019 19:30