Engineering, 25.02.2020 03:53 jholland03

A) The reverse-saturation current of a pn junction diode is IS = 10−11 A. Determine the diode voltage to produce currents of (i) 10 µA, 100 µA, 1 mA, and (ii) −5 × 10−12 A. (b) Repeat part (a) for IS = 10−13 A and part (a) (ii) for −10−14 A.

Answers: 2

Show answers

Answers

Answer from: shmote12

a) i) Vd = 358 mV , Vd = 417.5 mV, Vd = 477.2 mV

ii) Vd = -17.9 mV

b) Vd = 477.2 mV, Vd = 536.8 mV, Vd = 596.5 mV

Vd = 161 mV

Explanation:

We will use the ideal diode equation:

$I_{D} = I_{s} (e^{\frac{qv_{d} }{nkT} }-1)$

Where Id = Diode current

Is = Reverse Saturation Current

Vd = Diode Voltage

q = charge of electron

n = ideality factor

k = Boltzmann constant

T = Temperature in Kelvin

(a) We are given:

Is = 10⁻¹¹ A

i) Id = 10 μA

Ideally, kT/q = 25.9mV and n=1. So,

q/nkT = 38.6

Id = Is e^(38.6Vd) -1

Id/Is + 1 = e^(38.6Vd)

ln(Id/Is + 1) = 38.6Vd

Vd = ln(Id/Is + 1)/38.6

= ln [(10*10⁻⁶)/10⁻¹¹ + 1] / 38.6

= 13.815/38.6

Vd = 0.3579

Vd = 358 mV

Id = 100 µA

Vd = ln(Id/Is + 1)/38.6

= ln [(100*10⁻⁶)/10⁻¹¹ + 1] / 38.6

= 16.118/38.6

Vd = 0.4175

Vd = 417.5 mV

Id = 1 mA

Vd = ln(Id/Is + 1)/38.6

= ln [(1*10⁻³)/10⁻¹¹ + 1] / 38.6

= 18.420/38.6

Vd = 0.4772

Vd = 477.2 mV

ii) Id = -5 x 10⁻¹² A

Vd = ln(Id/Is + 1)/38.6

= ln [(-5 x 10⁻¹²)/10⁻¹¹ + 1] / 38.6

= -0.693/38.6

Vd = -0.0179 V

Vd = -17.9 mV

(b) Is = 10⁻¹³ A

i) Id = 10 µA

Vd = ln(Id/Is + 1)/38.6

= ln [(10 x 10⁻⁶)/10⁻¹³ + 1] / 38.6

= 18.42/38.6

Vd = 0.4772 V

Vd = 477.2 mV

Id = 100 µA

Vd = ln(Id/Is + 1)/38.6

= ln [(100 x 10⁻⁶)/10⁻¹³ + 1] / 38.6

= 20.723/38.6

= 0.5368 V

Vd = 536.8 mV

Id = 1 mA

Vd = ln(Id/Is + 1)/38.6

= ln [(1 x 10⁻³)/10⁻¹³ + 1] / 38.6

= 23.025/38.6

= 0.5965

Vd = 596.5 mV

ii) Id = -5 x 10⁻¹² A

Vd = ln(Id/Is + 1)/38.6

= ln [(-5 x 10⁻¹²)/10⁻¹³ + 1] / 38.6

= ln (-49) / 38.6

Not possible.

Is = -10⁻¹⁴

Id = -5 x 10⁻¹² A

Vd = ln(Id/Is + 1)/38.6

= ln [(-5 x 10⁻¹²)/-10⁻¹⁴ + 1] / 38.6

= 6.216/38.6

Vd = 0.161 V

Vd = 161 mV

Answer from: Quest

sorry what a asnns

explanation:

Answer from: Quest

answer:

can you answer my question?

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

You know the right answer?

A) The reverse-saturation current of a pn junction diode is IS = 10−11 A. Determine the diode voltag...

Questions