Engineering, 24.02.2020 23:32 star6097

A rectangular concrete beam has dimensions b=16 in. and h=30 in. The location of the Gr. 60 reinforcing bars, which are placed all in one row in the bottom of the section, is d=27 in. Using a specified compressive strength of concrete of 5,000 psi and the assumptions and simplifications of the ACI 318-14 Code, find the nominal flexural strength Mn for positive bending if the reinforcing bars are: a. Three No. 9 bars b. Four No. 9 bars c. Three No. 8 + two No. 10 bars d. None (i. e., the beam is unreinforced)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the main objective of using reheat rankine cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

A rectangular concrete beam has dimensions b=16 in. and h=30 in. The location of the Gr. 60 reinforc...

Questions