Engineering, 24.02.2020 18:31 aleexandras09
A subsurface exploration report shows that the average water content of a fine-grained soil in a proposed borrow area is 22% and that its average natural dry density is 82 pcf. This soil is to be placed in a compacted fill with a dry density specified at 96 pcf. How many cubic yards of borrow will be required to produce 50,000 yd3 of fill? What is the shrinkage factor for the borrow?
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
A subsurface exploration report shows that the average water content of a fine-grained soil in a pro...
Mathematics, 22.05.2020 21:05
English, 22.05.2020 21:05
Mathematics, 22.05.2020 21:05
Social Studies, 22.05.2020 21:05
Mathematics, 22.05.2020 21:05
Mathematics, 22.05.2020 21:05
English, 22.05.2020 21:05