Engineering, 22.02.2020 05:38 princeofpowerjr
In normal operation, a paper mill generates excess steam at 20 bar and 400◦C. It is planned to use this steam as the feed to a turbine to generate electricity for the mill. There are 5000 kg/hr of steam available, and it is planned that the exit pressure of the steam will be 2 bar. Assuming that the turbine is well insulated, what is the maximum power that can be generated by the turbine?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
In normal operation, a paper mill generates excess steam at 20 bar and 400◦C. It is planned to use t...
Questions
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
World Languages, 03.04.2021 22:50
Computers and Technology, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
Geography, 03.04.2021 22:50
Mathematics, 03.04.2021 22:50
