Engineering, 22.02.2020 01:18 coryintheswamp
Write a iterative function that finds the n-th integer of the Fibonacci sequence. Then build a minimal program (main function) to test it. That is, write the fib() solution as a separate function and call it in your main() function to test it. For reference see Fibonacci number. INPUT OUTPUT (0, 2) (1, 3) (2, 5) 5 INPUT: OUTPUT: (0, 2) (1, 3) (2, 5) (3, 8) (4, 13) 13 INPUT: OUTPUT: (0, 2) 6765 (1, 3) (2, 5) (3, 8) (4, 13) (5, 21) (6, 34) (7, 55) (8, 89) (9, 144) (10, 233) Note, the first number in the pair is the iteration count (i) and the second number is the value of the (i+2)-th Fibonacci value. Problem 2 Write a recursive function that finds the n-th integer of the Fibonacci sequence. Then build a minimal program to test it. For reference see Fibonacci number. To check for recursion, please have the Fibonacci function print out its input as shown in the examples below: INPUT: OUTPUT: fib(5) fib(4) fib(3) fib(2) fib(1) fib(0) fib(1) fib(2) fib(1) fib(0) fib(3) fib(2) fib(1) INPUT: OUTPUT: fib(7) fib(6) fib(5) fib(4) fib(3) fib(2) fib(1) fib(0) fib(1) fib(2) fib(1) fib(0) fib(3) 13 Problem 3 In this problem, you need to print the pattern of the following form containing the numbers from 1 to n: 4 4 4 4 4 4 4 4 3 3 3 3 3 4 4 3 2 2 2 3 4 4 3 2 1 2 3 4 4 3 2 2 2 3 4 4 3 3 3 3 3 4 4 4 4 4 4 4 4 Example when n=4. INPUT Input contains a single integer n. CONSTRAINTS • 1 <= n <= 1000 OUTPUT Print the pattern mentioned in the problem statement. EXAMPLES: INPUT: INPUT: OUTPUT: 2 2 2 2 1 2 2 2 2 INPUT: 5 OUTPUT: 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 5 5 4 3 3 3 3 3 4 5 5 4 3 2 2 2 3 4 5 5 4 3 2 1 2 3 4 5 5 4 3 2 2 2 3 4 5 5 4 3 3 3 3 3 4 5 5 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 INPUT: 7 INPUT: 7 OUTPUT: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 6 6 6 6 6 6 6 7 7 6 5 5 5 5 5 5 5 5 5 6 7 7 6 5 4 4 4 4 4 4 4 5 6 7 7 6 5 4 3 3 3 3 3 4 5 6 7 7 6 5 4 3 2 2 2 3 4 5 6 7 7 6 5 4 3 2 1 2 3 4 5 6 7 7 6 5 4 3 2 2 2 3 4 5 6 7 7 6 5 4 3 3 3 3 3 4 5 6 7 7 6 5 4 4 4 4 4 4 4 5 6 7 7 6 5 5 5 5 5 5 5 5 5 6 7 7 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
You know the right answer?
Write a iterative function that finds the n-th integer of the Fibonacci sequence. Then build a minim...
Questions
English, 02.03.2020 16:39
Computers and Technology, 02.03.2020 16:40
History, 02.03.2020 16:40
