Engineering, 22.02.2020 00:57 orlandoreypot2491

A pipe with a surface temperature of 250C passes through a room where the air temperature is 30C. Insulation (density = 577 kg/m3, k = 0.2 W/m-C) is to be applied to the pipe and a convection heat transfer coefficient of 4 W/m2-C can be expected to exist at the surface of the bare pipe or the surface of the insulation after it is applied.

Find the critical radius of the insulation;

if the pipe diameter is 5 cm and insulation of the radius found in part (a) is applied to it, find the heat loss from the pipe before and after the insulation is applied;

If the pipe diameter is 12 cm and insulation of the same thickness as that in part (b) is used, find the heat loss before and after the insulation is applied.

Draw a sketch showing heat transfer rate (W/m) as a function of pipe radius (R) for the two configurations above {(b) and (c)}.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c

Answers: 3

Answer

You know the right answer?

A pipe with a surface temperature of 250C passes through a room where the air temperature is 30C. In...

Questions