subject
Engineering, 21.02.2020 03:50 leoisawesome18

A symmetrical wedge with a 12° included angle is placed in an air flow in which the Mach number is 2.3 and the pressure is 60 kPa. If the centerline of the wedge is at an angle of 4° to the direction of flow, find the pressure difference between the two surfaces of the wedge.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
A symmetrical wedge with a 12° included angle is placed in an air flow in which the Mach number is 2...
Questions
question
Medicine, 02.04.2020 20:05
question
Biology, 02.04.2020 20:05
question
Chemistry, 02.04.2020 20:05
question
History, 02.04.2020 20:05
question
Mathematics, 02.04.2020 20:06
Questions on the website: 13722363