Engineering, 20.02.2020 23:52 eylinglez3ovm16v
Minimize each of the following functions using K-maps. (a)(3,5,6,7)=),,(mCBAf(b),13,14,15 )(0,1,4,6,9=),,,(mDCBAf(c)13,14,15 ),10,11,12,(0,1,2,8,9=),,,(mDCBAf( d)29,31),25,26,27,1,13,15,18(3,4,6, 9,1=)(mEDCBAf
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
You know the right answer?
Minimize each of the following functions using K-maps. (a)(3,5,6,7)=),,(mCBAf(b),13,14,15 )(0,1,4,6...
Questions
Mathematics, 31.07.2019 14:40
Mathematics, 31.07.2019 14:40
Chemistry, 31.07.2019 14:40
Mathematics, 31.07.2019 14:40
Mathematics, 31.07.2019 14:40
Mathematics, 31.07.2019 14:40
Mathematics, 31.07.2019 14:40
English, 31.07.2019 14:40
