Engineering, 18.02.2020 18:55 Mimical
The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-line diesel engine that delivers a maximum power of 2590 hp and causes the shaft to rotate at 1700 rpm . If the outer diameter of the shaft is 8 in. and the wall thickness is 3/8 in.
A) Determine the maximum shear stress developed in the shaft.
TMAX = ?
B) Also, what is the "wind up," or angle of twist in the shaft at full power?
φ = ?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
The hydrofoil boat has an A-36 steel propeller shaft that is 100 ft long. It is connected to an in-l...
Questions
Mathematics, 01.08.2019 00:10
Mathematics, 01.08.2019 00:10
Mathematics, 01.08.2019 00:10
Mathematics, 01.08.2019 00:10
