subject
Engineering, 18.02.2020 18:03 kimvigil4580

The velocity profile for the flow of a Newtonian fluid between two fixed, wide, parallel plates is given by the equation u => 1-0), where V is the average velocity. The fluid has a viscosity of 1 mPa. s. Also, V=0.35 cm/s and h= 5 cm. Determine: a. the shearing stress acting on the bottom wall b. the shearing stress acting on the plane parallel to the walls and passing through the centerline (mid-plane). Sketch the profile of the magnitude of the shear stress from the centerline to the walls. c. If the density of the fluid described in this problem is 1000 kg/m", is the flow laminar or turbulent?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
The velocity profile for the flow of a Newtonian fluid between two fixed, wide, parallel plates is g...
Questions
Questions on the website: 13722363