subject
Engineering, 18.02.2020 05:36 20warriorsoul14

A 6-m section of 150-Ω lossless line is driven by a source with vg (t) = 5 cos 8π × 107 t − 30◦ (V) and Zg = 150 Ω. If the line, which has a relative permittivity r = 2.25, is terminated in a load ZL = 150 − j50 Ω, find the following:

(a) λ on the line.
(b) The reflection coefficient at the load.
(c) The input impedance.
(d) The input voltage Vi .
(e) The time-domain input voltage vi (t).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
You know the right answer?
A 6-m section of 150-Ω lossless line is driven by a source with vg (t) = 5 cos 8π × 107 t − 30◦ (V)...
Questions
Questions on the website: 13722361