subject
Engineering, 17.02.2020 20:11 amakayla57

A stainless steel billet (k = 13 Btu/hr-ft-F, α = 0.24 ft2 /hr), 4 inches in diameter, is passing through a 20 ft. long heat-treating furnace. The initial billet temperature is 200°F, and it must be raised to a minimum temperature of 1500°F before working. The heat transfer coefficient between the furnace gases and the billet surface is 6 Btu/hr ft2 F, and the furnace gases are at 2200°F. At what maximum velocity (ft/min.) can the billet travel through the furnace and satisfy these conditions?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
You know the right answer?
A stainless steel billet (k = 13 Btu/hr-ft-F, α = 0.24 ft2 /hr), 4 inches in diameter, is passing th...
Questions
question
Mathematics, 02.06.2020 23:59
question
Mathematics, 02.06.2020 23:59
question
Mathematics, 02.06.2020 23:59
Questions on the website: 13722363