subject
Engineering, 17.02.2020 19:42 scottytohotty

The doping concentrations in a silicon pn junction are Nd = 5 times 1015 cm-3 and Na = 5 times 1016 cm-3. The minority carrier concentration at either space charge edge is to be no larger than 10 percent of the respective majority carrier concentration. Determine the maximum forward-bias voltage that can be applied to the junction and still meet the required specifications. Is the n-region or p-region concentration the factor that limits the forward-bias voltage? Repeat part (a) if the doping concentrations are Nd = 3 times 1016 cm-3 and Na = 7 times 1015 cm-3.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
The doping concentrations in a silicon pn junction are Nd = 5 times 1015 cm-3 and Na = 5 times 1016...
Questions
question
History, 21.01.2021 07:20
question
Chemistry, 21.01.2021 07:20
Questions on the website: 13722367