Engineering, 14.02.2020 05:25 jaydahh4059

If you haven’t already done so, enter the commands in the example above to generate the permutation matrix E defined in (2) (you can suppress this matrix). Generate a 5 × 5 matrix A with integer entries using the command A = floor(10*rand(5))
(a) Compute the product EA and compare the answer with the matrix A. How are the two matrices related? Describe the effect on A of left multiplication by the permutation matrix E. Be specific! Compute the product AE and compare the answer with the matrix A. How are the two matrices related? Describe the effect on A of right multiplication by the permutation matrix E. Be specific!
(b) Compute E−1 and ET (recall that ET is computed in MATLAB with the command E’), and observe that they are also permutation matrices. What else do you observe about E−1 and ET ?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

Engineering, 06.07.2019 03:20

Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?

Answers: 3

Answer

Engineering, 06.07.2019 03:20

Steam at a pressure of 100 kpa and a quality of 50% initially fills a rigid vessel having a volume of 0.5 m^3. the steam is then heated, causing the pressure in the vessel to rise to 150 kpa. determine: i. the mass of the steam in the vessel. ii. the temperature and quality of the steam after the heating process. ii the mass of the vapour, mg and liquid, m in the vessel after the heating process. if the steam in the vessel is now further heated, what would the pressure and temperature in the vessel be when all steam has turned into saturated vapour? b. sketch the processes in part (a) and part (b) on p-v and t-v diagrams, indicating clearly the temperatures, pressures and the paths. c. (0.59kg, 111.4°c, 73%, 0.4307kg, 0.1 593kg, 2.11 bar, 121.84°c)

Answers: 1

Answer

You know the right answer?

If you haven’t already done so, enter the commands in the example above to generate the permutation...

Questions