subject
Engineering, 13.02.2020 20:00 kaaylon8285

The hydrolys is of esters fequently is catalyzed by acids. RCOOR' + H2O → RCOOH + R'0H As the above hydrolysis reaction proceeds, more acid is produced and the concentration of catalyst increases. This phenomenon, known as "autocatalysis is captured by the rate equation: Here ko is the rate constant in the absence of the organic acid that is produced by the [RCOORo 1 M [H2010 1M reaction. The initial/inlet concentrations are listed below: The rate constants are koー0.01 (Mh)", k1 = 0.20 M-2h-1. The reaction takes place in the liquid phase. (a) Cakculate the values of -TRCOOR, at fractional conversions of ester of xRCOOR 0,0.1,0.2,0.3,0.4,0.5,0.6,0.7.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
The hydrolys is of esters fequently is catalyzed by acids. RCOOR' + H2O → RCOOH + R'0H As the above...
Questions
question
Mathematics, 14.04.2020 17:57
question
Mathematics, 14.04.2020 17:57
Questions on the website: 13722362