Engineering, 13.02.2020 18:40 isaiahjohnson2594
How safe is your design using 8-mm bolts that yield at 0.5 MPa? That is, can you quantify the extra supplied cross-sectional area as a ratio called the factor of safety? The factor of safety i
Answers: 1
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
How safe is your design using 8-mm bolts that yield at 0.5 MPa? That is, can you quantify the extra...
Mathematics, 17.01.2022 09:50
Biology, 17.01.2022 09:50
Mathematics, 17.01.2022 14:00
Mathematics, 17.01.2022 14:00
Mathematics, 17.01.2022 14:00
Mathematics, 17.01.2022 14:00
Mathematics, 17.01.2022 14:00
Physics, 17.01.2022 14:00
Mathematics, 17.01.2022 14:00