Engineering, 12.02.2020 03:59 marmar69
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of 15 MPa and 10 kPa. The mass flow rate of steam through the cycle is 12 kg/s. Steam enters both stages of the turbine at 500 oC.
If the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 5%, determine
(a) The pressure, in kPa ,at which reheating takes place,
(b) The total rate of heat input, in kW, in the boiler,
(c) The thermal efficiency of the cycle. Also, show the cycle on a T-s diagram with respect to the saturation lines.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of 15 MPa...
Questions
Mathematics, 21.12.2020 14:00
Mathematics, 21.12.2020 14:00
Chemistry, 21.12.2020 14:00
Mathematics, 21.12.2020 14:00
Arts, 21.12.2020 14:00
Physics, 21.12.2020 14:00
English, 21.12.2020 14:00
Arts, 21.12.2020 14:00
