Engineering, 12.02.2020 03:18 madelyngv97

A rigid tank contains liquid water and water vapor with an initial total internal energy of 500 kJ. During the process over 1 minute, 900 kJ of energy are transferred into the system from a burner and 50 A of electrical current was supplied to the resistor at the voltage of 110 V. As a result, 800 kJ are transferred from water to the surrounding air.(a) What kind of work interaction is present in this process? Consider the walls of the rigid tank as the system.
(b) Is this process adiabatic?
(c) After this process the volume of the tank will change?
(d) Calculate the final internal energy of the water contained in the tank (neglect the energy stored in the tank walls).

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 12:10

On a average work day more than work place firs are reorted

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

You know the right answer?

A rigid tank contains liquid water and water vapor with an initial total internal energy of 500 kJ....

Questions