subject
Engineering, 11.02.2020 20:37 Lscifa

Given the dimensions in the figure above, and the following data:

Water Temperature: 21.6 degrees celsius

(Depth = Depth of the water in each trial and there was seven trials)

(Mass = Mass of each trial needed to equalize the beam)

1. Compare the theoretical force with the measured force. The measured force is obtained by setting the summation of moments about the pivot point equals to zero. However, the calculation involved the assumption that the center of pressure can be calculated from the equation provided below.

2. Also confirm that if depth is less than 100mm, the center of pressure is located h/3 from the bottom of the quadrant(h=depth of water). Explain why the center of pressure is NOT located at a distance h/3 from the bottom of the quadrant for depths greater than 100mm.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
You know the right answer?
Given the dimensions in the figure above, and the following data:

Water Temperature: 21....
Questions
question
Mathematics, 14.11.2019 12:31
question
Mathematics, 14.11.2019 12:31
question
English, 14.11.2019 12:31
question
History, 14.11.2019 12:31
Questions on the website: 13722363