A vertical load of 20000 lb is applied to a 6.0 ft × 4.0 ft area at the ground surface that is level. Use chart solution to compute the induced vertical stress, at a point 6.0 ft below the corner z of this rectangular loaded area.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.