Engineering, 06.02.2020 02:46 alissa3329
Ineed to find the area of a rocket 1 liter bottle with radius =40mm the bag coefficient is 0.299 for the 150 mmlong nose cone velocity is 30 m\s what is the frontal area
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Ineed to find the area of a rocket 1 liter bottle with radius =40mm the bag coefficient is 0.299 for...
English, 03.12.2020 01:00
Mathematics, 03.12.2020 01:00
Mathematics, 03.12.2020 01:00
Spanish, 03.12.2020 01:00
Mathematics, 03.12.2020 01:00
English, 03.12.2020 01:00
Mathematics, 03.12.2020 01:00