subject
Engineering, 29.01.2020 03:42 marvin07

Asample of blue gray soil was obtained from the seattle waterfront to determine its atterberg limits and classify it's soil type according to the unified soil classification system. for one of the pl determinations, the wet weight + dish = 22.24 grams and the dry weight + dish = 15.63 grams. the dish only weighed 5.72 grams. compute the plastic limit. three determinations of the liquid limit were made. for 17 blows, the water content was 89%; for 26 blows, the water content was 78%; and for 36 blows, the water content was 69%. the soil had no organics and contained 20% sand. evaluate the soil type, plot the plasticity information on a plasticity chart, and give the unified soil classification symbol.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
You know the right answer?
Asample of blue gray soil was obtained from the seattle waterfront to determine its atterberg limits...
Questions
question
Mathematics, 04.03.2021 22:40
question
Mathematics, 04.03.2021 22:40
question
Mathematics, 04.03.2021 22:40
question
Geography, 04.03.2021 22:40
Questions on the website: 13722367