Engineering, 23.01.2020 18:31 joshuabm42407
The rigid bar cde is attached to a pin support at e and rests on the 30 mm diameter brass cylinder bd. a 22 mm diameter steel rod ac passes through a hole in the bar and is secured by a nut which is snugly fitted when the temperature of the entire assembly is 20oc. the temperature of the brass cylinder is then raised to 50oc while the steel rod remains at 20oc.
assuming that no stresses were present before the temperature change,
determine the stress in the cylinder.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
The rigid bar cde is attached to a pin support at e and rests on the 30 mm diameter brass cylinder b...
Questions
English, 24.01.2020 19:31
Mathematics, 24.01.2020 19:31
Mathematics, 24.01.2020 19:31
Computers and Technology, 24.01.2020 19:31
Mathematics, 24.01.2020 19:31
Biology, 24.01.2020 19:31
Physics, 24.01.2020 19:31
History, 24.01.2020 19:31
English, 24.01.2020 19:31
Computers and Technology, 24.01.2020 19:31
