subject
Engineering, 20.01.2020 19:31 eburnhisel2023

Well-insulated rigid tank contains 2 kg of a saturated liquid-vapor mixture of water at 150 kpa. initially, three-quarters of the mass is in the liquid phase. an electric resistor placed in the tank is connected to a 110 v source, and a current of 8 a flows through the resistor when the switch is turned on. determine how long it will take to vaporize all the liquid in the tank. also, show the process on a t-v diagram with respect to the saturation curve.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
Well-insulated rigid tank contains 2 kg of a saturated liquid-vapor mixture of water at 150 kpa. ini...
Questions
question
Chemistry, 01.07.2020 15:01
Questions on the website: 13722363