Engineering, 15.01.2020 23:31 washingtonwhitney995
The 12-kg slender rod is pinned to a small roller a that slides freely along the slot. if the rod is released from rest at θ = 0∘, determine the angular acceleration of the rod and the acceleration of the roller immediately after the release.
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
The 12-kg slender rod is pinned to a small roller a that slides freely along the slot. if the rod is...
Mathematics, 05.07.2020 14:01
Computers and Technology, 05.07.2020 14:01
Mathematics, 05.07.2020 14:01
Social Studies, 05.07.2020 14:01
Mathematics, 05.07.2020 14:01