subject
Engineering, 08.01.2020 05:31 amanramesh2004

Apower plant uses steam and a rankine cycle. the turbine inlet is at 600 kpa and 300 c; the condenser is at 10 kpa with saturated liquid water leaving the condenser. the turbine has an efficiency of 80%; the pump has an efficiency of 100%. you do not need to find all the state values, just those to: determine the thermal efficiency of the cycle. wnet/ qin for an ideal power plant operating between the turbine and the condenser temperatures, what would the maximum efficiency be?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
Apower plant uses steam and a rankine cycle. the turbine inlet is at 600 kpa and 300 c; the condens...
Questions
question
Geography, 30.03.2021 14:10
question
Computers and Technology, 30.03.2021 14:20
question
Mathematics, 30.03.2021 14:20
Questions on the website: 13722367