subject
Engineering, 03.01.2020 02:31 kobiemajak

Engine oil at 100°c and a velocity of 0.05 m/s flows over both surfaces of a 0.8-m-long flat plate maintained at 20°c. determine: (a) the velocity and thermal boundary layer thicknesses at the trailing edge. (b) the local heat flux and surface shear stress at the trailing edge. (c) the total drag force and heat transfer per unit width of the plate.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
You know the right answer?
Engine oil at 100°c and a velocity of 0.05 m/s flows over both surfaces of a 0.8-m-long flat plate m...
Questions
question
Mathematics, 15.10.2021 14:00
question
Mathematics, 15.10.2021 14:00
question
Mathematics, 15.10.2021 14:00
question
Mathematics, 15.10.2021 14:00
Questions on the website: 13722367