subject
Engineering, 03.01.2020 02:31 tonio638

For a two-source network, if current produced by one source is in one direction, while the current produced by the other source is in the opposite direction through the same resistor, the resulting current is? a. the product of the two and the direction of the smaller b. the difference between the two and has the same direction. c. the sum of the two and the direction of either d. the average of the two and the direction of the largest

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160Ā°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200Ā°c while the air temperature is 20Ā°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200Ā°c20Ā°c)/2 = 110Ā°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
For a two-source network, if current produced by one source is in one direction, while the current p...
Questions
question
Mathematics, 02.12.2020 01:00
question
Mathematics, 02.12.2020 01:00
question
Social Studies, 02.12.2020 01:00
Questions on the website: 13722367