Engineering, 27.12.2019 07:31 lishalarrickougdzr

How many tons of coarse aggregate will be required to fill a trench 8 foot deep, 5 foot wide, and 675 feet long. the coarse aggregate unit weight is 95.2lb/cft? the owner is concerned th install lightweight aggregate, with a unit weight of 55.0 lb/cft. how many yards of lightweight aggregate are required? if each dump truck holds 18cy and the maximum carrying capacity 50,000 lbs, calculate how many loads each stone will require to fill the trench at the weight of the aggregate may affect a nearby foundation and has asked to

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

You know the right answer?

How many tons of coarse aggregate will be required to fill a trench 8 foot deep, 5 foot wide, and 67...

Questions